What are the differences in the pasting effect of wallpaper glue on different wall materials?
Publish Time: 2025-06-11
In interior decoration, choosing the right wallpaper glue is essential to ensure the beauty and durability of wallpaper. However, different wall materials have different requirements for wallpaper glue. Understanding these differences can help you better choose the right product and carry out the construction to achieve the best results. The following are several common wall materials and their effects on the pasting effect of wallpaper glue.
First of all, gypsum board wall is one of the most common wall materials in home decoration. This kind of wall has good flatness and water absorption, but its surface is usually rough and easy to absorb moisture. Therefore, when using wallpaper glue, you should choose products with strong initial adhesion and appropriate fluidity. High fluidity can ensure that the glue can evenly cover the entire wall and fill in the slight unevenness. In addition, due to the strong water absorption of gypsum board wall, it is recommended to choose quick-drying wallpaper glue to avoid deformation or damage of the wall due to long-term moisture. The correct construction steps include leveling the wall with putty powder, then applying primer, and finally pasting the wallpaper, which can significantly improve the adhesion and overall effect of the wallpaper.
Secondly, cement wall is also a widely used substrate. Compared with gypsum board, cement wall is stronger and less prone to deformation, but its surface is often rougher and more absorbent. In this case, it is particularly important to choose a wallpaper glue designed for cement wall. This type of glue usually contains a high solid content and can form a strong bonding layer after drying, which effectively prevents wallpaper from falling off or warping. At the same time, in order to ensure that the glue can fully penetrate the micropores on the wall, the wall needs to be thoroughly cleaned before construction and any loose particles or old coatings need to be removed. If the wall is too dry, you can also slightly wet the wall with water to enhance the adhesion of the glue.
In addition, wooden wall is very popular in some decoration projects with specific styles, such as country style or retro style rooms. However, the surface smoothness and water absorption of wooden wall are both low, which poses new challenges to the selection of wallpaper glue. In this case, it is recommended to use wallpaper glue designed specifically for low water absorption surfaces. This type of glue usually has higher viscosity and longer open time to facilitate the adjustment of the wallpaper position and exhaust air to reduce the generation of bubbles. In addition, in order to prevent the wooden wall from expanding or contracting due to humidity changes, which will affect the pasting effect of the wallpaper, the wall should be completely dry before construction, and consider using a moisture-proof treatment agent to enhance stability.
In addition, although tile walls are not the most common wallpaper pasting substrate, they are also used in some special occasions. For example, in humid environments such as kitchens or bathrooms, waterproof wallpaper is sometimes chosen to be pasted on tiles to improve the visual effect of the space. For tile walls, special strong wallpaper glue must be used, because ordinary glue is difficult to provide sufficient adhesion on such smooth and almost non-absorbent surfaces. Strong wallpaper glue not only has extremely high initial viscosity and final strength, but also can fill the tiny gaps in the tile joints to a certain extent, ensuring that the wallpaper is firmly attached to the wall. Before construction, be sure to thoroughly clean the tile surface to remove oil, dust and other impurities, and lightly polish as needed to increase friction.
It is worth mentioning that glass walls, as an emerging decorative trend, have also begun to appear in some modern style designs. Similar to tiles, glass walls are very smooth and non-absorbent, so strong wallpaper glue is also required. However, due to the characteristics of glass, even the strongest wallpaper glue may have difficulty maintaining a stable adhesion of wallpaper for a long time. Therefore, when pasting wallpaper on glass walls, in addition to choosing the right glue, you also need to take additional fixing measures, such as using double-sided tape or frames to reinforce the edges to prevent the wallpaper from peeling off over time.
From a practical application perspective, choosing the right type of wallpaper glue depends on the specific wall conditions and wallpaper material. For example, for highly absorbent walls (such as gypsum board or cement walls), you should choose wallpaper glue designed specifically for such substrates; while for smooth walls (such as glass or tiles), you need to use products with stronger adhesion. In addition, wallpapers of different materials (such as paper, PVC, non-woven fabrics, etc.) have different requirements for glue, so you should read the product instructions carefully when purchasing to ensure that the selected glue matches the wallpaper.
Different wall materials have different requirements for wallpaper glue. Understanding these differences will help you choose the most suitable product and perform the correct construction to ensure the flatness, durability and beauty of the wallpaper. Whether facing highly absorbent gypsum wall, solid cement wall, smooth wood or tile wall, or special glass wall, by carefully selecting and correctly using wallpaper glue, you can achieve the ideal decorative effect. For consumers who pursue high-quality life, this is not only a key step to enhance the beauty of living space, but also an important measure to ensure a healthy and comfortable living environment for their family.
